M365 Wide Rear Fender for Suspension Mod
Thomas PerssonAn STL-file of a wide rear fender designed to work on the M365 scooter with the Chinese rear suspension.
Only tested with tire size of 8".
Experimental 10" size is now available but not tested.
Another experimental 10" version with flipped brake light is added.
Important!
You will need a larger print bed in order to print this model.
I printed this on its side at an angle in order to fit it properly.
See the specs of my printer in the details below.
This file needs to be sliced in a slicer program of your choice.
I recommend Ultimaker Cura.
Update:
- Added a split version for smaller print beds.
I have not tested this version myself, so print this at your own risk.
Split version needs to be glued.
- Added an experimental 10" version.
Please note that this most likely needs to be split unless you have an enormous print bed.
- Added an experimental 10" version with flipped brake light.
Please note that this most likely needs to be split unless you have an enormous print bed.
Please note that this most likely needs to be split unless you have an enormous print bed.
Please note that this most likely needs to be split unless you have an enormous print bed.
Print Settings
Printer brand:
aRtilleRy
Printer:
Sidewinder X1 v4
Bed size:
300x300x400
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.4mm or less
Infill:
20% to Solid piece
Filament_brand:
Generic
Filament_color:
-
Filament_material:
PLA
STL-files of a rear fender for the Xiaomi M365 Chinese suspension mod.